Application
: Strippable coating can be
sprayed, or coated. For spraying, use standard pressure
equipment with spray pressure of 4 to 5 kg/cm2 in the air
line. Adjust the air to provide a wide spray and hold the gun
150 to 200 mm. away from the work place, in case of painted
surfaces.
Uses
: Strippable coating is used :
1. For protection
of sheet metal and anodized metal from scratch and die marks during
fabrication, punching, bending, stamping, deep drawing and screw
fastening.
2. In automobile
manufacture, air craft industry and electrical industries for
protection of as and other metal surfaces against scratches and
damage during assembly operation.
3. To protect
finished metal surfaces during shipments and transit from one place
to the other.
4. For protection to decorative and
electroplated, anodized metal surface such as handles, locks, name
plates, labels, cabinet fronts and tops.
5. For protection
of consumer products which need protection against rust and
scratches.
Packing : It is supplied in 20 litres carboys and
200 litres drums ready for use.
Storage and Shelf
Line : Organosols have tendency
to thicken ( increase in viscosity ) on standing and therefore
should be stored in a cool and dry place. The viscosity
increases due to storage. Can however be reduced to a certain
extent by adding reducer. Shelf life is at least six months
under normal temperature conditions.
Special Instruction
: Not to be used near flame or
heat, contains volatile ingredients. Keep containers closed
when not in use.
Note : It should
be appreciated that the information given here is to the best of our
knowledge, true and accurate. However, since conditions under
which our products are used are beyond our control, recommendations
are made without warranty or
guarantee. |
